The tool tray keypad operation is separated from the hanger, which makes it easy for dentists to access items without being restricted by the area during the operation.
The used high-temperature resistant and sterilizable silicone pad also enhances the dentist's experience of use.
PU Cushion
PU leather seat cushions can be matched according to different decoration styles and needs.
This not only improves the overall aesthetics of the dental chair, but also creates a comfortable and warm treatment environment for patients.
It can maintain the clean and beautiful appearance during long-term use and extend the service life of the dental chair.
Unit Box
The water vapor area and electrical area of the dental chair chassis are laid out separately.
One of the advantages is that it can effectively isolate water vapor and electrical equipment to prevent water vapor from damaging electrical equipment.
The water vapor area is usually located in the lower part of the unit box and is used to store water-related equipment such as water tanks and water pumps, while the electrical area is located in the upper part of the unit box and is used to store electrical equipment.
{"type": "4"}
Standard configuration：
>High speed handpiece connector
2 sets
>Low speed handpiece connector
1 set
>3-way syringe (cold & hot)
2 sets
>Operation 6-LED sensor lamp light
1 set
>Buit-out/in ground box
1 set
>Aluminum saliva ejector (strong & weak)
1 set
>Tool tray heat-resistant sillcone pad
1 set
>Movable controllable assistant device
1 set
>Four-function foot-pedal
1 set
>24V D.C noiseless motor
2 sets
>PU cushion and backrest
1 set
>Doctor’s stool-Basic
1 set
Features:
1.LED Sensor operation lamp
2.The injection molding tool tray is simple and generous,with high temperature resistant protective pad
3.The unit box is designed for separation of water and electricity
Parameter：
Package size
G.W.
1.00*1.30*0.85m
196KG
Technical parameters:
Input power : 350VA
Water pressure :0.2MPa-0.4MPa
Air pressure : 0.5MPa-0.6MPa
Power supply : 220V 50Hz 2.5A(110V 60HZ 5A)
Standard configuration：
>High speed handpiece connector
2 sets
>Low speed handpiece connector
1 set
>3-way syringe (cold & hot)
2 sets
>Operation 6-LED sensor lamp light
1 set
>Buit-out/in ground box
1 set
>Aluminum saliva ejector (strong & weak)
1 set
>Tool tray heat-resistant sillcone pad
1 set
>Movable controllable assistant device
1 set
>Four-function foot-pedal
1 set
>24V D.C noiseless motor
2 sets
>PU cushion and backrest
1 set
>Doctor’s stool-Basic
1 set
Features:
1.LED Sensor operation lamp
2.The injection molding tool tray is simple and generous,with high temperature resistant protective pad
3.The unit box is designed for separation of water and electricity
The installation of a dental chair is a pivotal process in establishing a fully functional dental clinic. A correctly installed dental chair not only ensures the comfort and safety of patients but also enhances the efficiency of dental practitioners. Understanding the complexities involved in dental
Understanding the mechanics behind a dental chair is essential for appreciating the complexities involved in dental care. A dental chair is more than just a seat; it is a sophisticated piece of equipment designed to provide optimal comfort for the patient and functionality for the dentist.
In the realm of dental care, maintaining impeccable hygiene standards is not just a best practice but an absolute necessity. The dental chair, being the centerpiece of patient interaction, is a focal point for potential cross-contamination. Proper disinfection protocols are essential to safeguard bo
The dental chair is a cornerstone of any dental practice, serving as the primary point of patient interaction and clinical procedures. Understanding the cost factors associated with acquiring a dental chair is crucial for dental professionals looking to equip their clinics with the best possible equ
2nd to 4th Floors, NO.3, Shangan Industrial Zone Ⅱ, Danzao Town, Nanhai District, Foshan Guangdong, 528216, China
About Us
FOSHAN KEJU MEDICAL APPARATUS CO.,LTD. was established in 2009. It is a professional manufacturer integrated in design, development, production and distribution of dental equipment.
