- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
| Quantity: | |
|---|---|
KJ-2EW 35L
FSKEJU
KJ-2EW 35L
The FSKEJU KJ-2EW 35L dental air compressor is designed to provide compressed air for dental clinic and dental unit applications. With a rated airflow of 105 L/min, 850W power, a 35L air tank and 7.5 bar pressure, this model is configured as a one-compressor-for-two-chair solution for applicable dental treatment environments.
The KJ-2EW 35L is available in 110V/60Hz and 220V/50Hz electrical configurations, allowing the appropriate version to be selected according to the destination market and installation site. The specified noise level is 65 dB.
For other clinic capacities and compressor configurations, browse our dental air compressor range.
KJ-2EW 35L Product Snapshot
Model: KJ-2EW 35L
Application: Dental Clinic / Dental Unit
Chair Configuration: One for Two
Tank Capacity: 35L
Power: 850W
Rated Airflow: 105 L/min
Pressure: 7.5 bar
Noise Level: 65 dB
The KJ-2EW 35L is configured as a one-for-two dental air compressor for installations where one compressor supplies compressed air to two compatible dental chairs.
This configuration can be considered for small and medium dental clinics operating two treatment rooms or two dental units from a shared compressor system. The number of chairs, however, should not be the only compressor-sizing criterion.
Actual compressed-air demand depends on the dental units, air-driven instruments and other connected equipment, as well as how frequently they operate at the same time. For projects with unusual or continuous air demand, the required total airflow should be reviewed before final compressor selection.
Compressor Sizing Note
“One for Two” describes the intended chair configuration for the KJ-2EW 35L. Where both treatment stations may have high simultaneous compressed-air demand, compare the required airflow of the connected equipment with the compressor capacity before ordering.
The KJ-2EW 35L provides a rated airflow of 105 L/min. Airflow is one of the key specifications when selecting a dental compressor because it describes the volume of compressed air the unit can supply over time.
When comparing compressors for multi-chair installations, airflow should be considered together with the number of treatment units, expected simultaneous equipment use, pressure and tank capacity rather than evaluating tank size alone.
The KJ-2EW 35L has a pressure specification of 7.5 bar. Compressor pressure should be considered together with the requirements of the connected dental units and any regulators, filters or other air-treatment components used in the installation.
Dental chair operating pressure and compressor pressure are not necessarily the same specification. The downstream air system should therefore be configured according to the requirements of the connected dental equipment.
The KJ-2EW version on this page is equipped with a 35L air tank. The tank stores compressed air within the system and works together with the compressor output as air demand changes during clinic operation.
Tank capacity and airflow are different specifications. When comparing compressor models, review both the 35L tank capacity and the 105 L/min rated airflow rather than using tank size alone as an indication of compressor output.
The KJ-2EW family includes both 35L and 38L tank configurations. Because the two versions share several operating specifications, the required tank capacity should be stated clearly in quotations, purchase orders and shipping documentation.
Specification | KJ-2EW 35L | KJ-2EW 38L |
|---|---|---|
Tank Capacity | 35L | 38L |
Power | 850W | 850W |
Rated Airflow | 105 L/min | 105 L/min |
Pressure | 7.5 bar | 7.5 bar |
Noise Level | 65 dB | 65 dB |
Chair Configuration | One for Two | One for Two |
If the 38L version is required instead, review the KJ-2EW 38L oil-free dental air compressor before finalizing the order.
The KJ-2EW 35L is available in 110V/60Hz and 220V/50Hz electrical configurations. Please specify the required voltage and frequency according to the destination market and installation site before production and shipment.
Voltage and frequency should be stated clearly in the quotation and purchase order so that the supplied compressor matches the intended electrical system.
The KJ-2EW 35L has a specified noise level of 65 dB, providing a useful reference when planning compressor placement within or near a dental clinic.
Actual sound experienced after installation can vary according to room construction, measurement distance, ventilation openings, floor vibration, compressor operating state and placement. Where acoustic performance is an important project requirement, these conditions should be considered when planning the installation.
The KJ-2EW 35L combines an 850W compressor, 105 L/min rated airflow, 35L air tank and 7.5 bar pressure for two-chair dental installations.
KJ-2EW 35L Dental Air Compressor | |
|---|---|
Model | KJ-2EW 35L |
Chair Configuration | One for Two / Two Dental Chairs |
AC Voltage | 110V / 60Hz or 220V / 50Hz |
Power | 850W |
Rated Airflow | 105 L/min |
Noise Level | 65 dB |
Tank Capacity | 35L |
Pressure | 7.5 bar |
Lubrication Configuration | Available upon request |
Product Dimensions | Available upon request |
Net / Gross Weight | Available upon request |
A dental air compressor should be selected and installed as part of the complete clinic air-supply system. In addition to compressor capacity, installation planning should consider electrical supply, ventilation, air-line routing and the requirements of the connected dental equipment.
✓ Chair quantity: determine whether the project requires a compressor configured for two dental chairs.
✓ Simultaneous air demand: review the dental units and air-driven equipment likely to operate at the same time.
✓ Voltage and frequency: select 110V/60Hz or 220V/50Hz according to the installation site.
✓ Compressor version: specify the 35L tank version clearly when this configuration is required.
✓ Installation location: provide sufficient space and follow the applicable ventilation and service-access requirements.
✓ Air-line system: review piping, filtration, drainage and pressure-control requirements for the complete clinic installation.
✓ Shipping information: request final dimensions, weight and packing data when planning international transport.
A two-chair compressor can be considered when a clinic plans to supply compressed air to two compatible dental treatment units from one compressor system. Compared with installing a separate compressor for each chair, a shared system can simplify equipment planning where the available airflow and installation conditions are appropriate.
Chair count should always be considered together with actual air demand. Clinics expecting both operatories to run air-intensive equipment simultaneously should provide the intended dental unit and equipment information before finalizing compressor capacity.
Routine maintenance helps keep the compressor and downstream air system operating according to the intended equipment requirements. Inspection intervals and maintenance procedures should follow the operating documentation supplied with the KJ-2EW 35L.
Items such as condensate management, filters, air connections, tank condition and electrical components should be checked according to the applicable maintenance schedule. The compressor should be isolated from electrical power and residual pressure as required before servicing.
Founded in 2009 in Foshan, Guangdong, FOSHAN KEJU MEDICAL APPARATUS CO., LTD. designs, develops, manufactures and supplies dental equipment for clinics, distributors and equipment projects.
Our dental air compressor range includes different tank capacities and chair configurations for different clinic scales and compressed-air requirements. Our team can assist with model selection according to treatment-station quantity, electrical supply and expected equipment demand.
Learn more about our manufacturing background on the FSKEJU About page, or compare additional dental air compressors.
The KJ-2EW 35L is configured as a “One for Two” compressor for installations serving two dental chairs. Final suitability should also be evaluated against the simultaneous compressed-air demand of the connected equipment.
The rated airflow is 105 L/min.
This KJ-2EW version has a 35L air tank. A separate 38L KJ-2EW version is also available, so please specify the required tank capacity when ordering.
The pressure specification is 7.5 bar.
The KJ-2EW 35L is available in 110V/60Hz and 220V/50Hz electrical configurations. Please specify the required electrical version according to your destination market when ordering.
The KJ-2EW 35L has a specified noise level of 65 dB. Actual installed sound can also be influenced by room layout, compressor placement, operating conditions and measurement distance.
Please contact our team for the applicable KJ-2EW 35L lubrication configuration if this specification is required for your clinic, distributor project or procurement documentation.
Please provide the required quantity, destination country, number of dental chairs, electrical supply, expected equipment configuration and whether the 35L or another tank version is required.
Request a KJ-2EW 35L Compressor Quotation
Provide your destination market, voltage, number of dental chairs, expected equipment configuration and required quantity. Our team can then review the appropriate KJ-2EW compressor configuration, packing information and order requirements with you.
Contact Us for KJ-2EW 35L Product Information and Quotation →
