- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
| Quantity: | |
|---|---|
The KEJU KC-017 dental chair armrest is supplied as a spare component for compatible dental chair and dental unit applications. It is intended for equipment maintenance, replacement and refurbishment where an existing patient-chair armrest needs to be replaced.
The KC-017 is an individual dental chair spare part rather than a complete treatment unit. Because armrests can differ in shape, dimensions, mounting structure, installation side and movement configuration, the replacement should be matched with the original dental chair before ordering.
Additional replacement components are available in our dental chair spare parts range.
KC-017 Product Snapshot
Model: KC-017
Product Type: Dental Chair Armrest
Category: Dental Chair Spare Part
Application: Dental Chair / Dental Unit
Brand: KEJU
Installation: According to dental chair configuration
An armrest forms part of the patient-support structure of a dental chair. Its position and shape provide a defined support area for the patient's arm while seated and can also affect patient access when entering or leaving the treatment chair.
The KC-017 is intended for compatible dental chair configurations where its armrest design and mounting arrangement correspond with the original equipment. It should therefore be selected according to the dental chair configuration rather than treated as a universal accessory.
Dental chair armrests are handled repeatedly during routine use and may require replacement because of surface wear, looseness, physical damage or refurbishment of an existing treatment chair.
When replacing an armrest, both the visible component and its attachment to the dental chair should be inspected. A damaged mounting point, fastener or surrounding chair structure may also need attention before the replacement part is installed.
Replacement Note
Do not select a replacement armrest only by external appearance. Dental chair armrests with similar shapes may use different mounting dimensions, installation sides or movement mechanisms.
Correct mechanical fit is important when replacing structural or patient-contact components on a dental chair. Providing information about the original chair and armrest helps our team review the replacement requirement before shipment.
✓ Dental chair model: provide the manufacturer and model number whenever available.
✓ Original armrest photos: provide clear images of the armrest and its connection to the dental chair.
✓ Installation side: identify whether the required armrest is installed on the left, right or another specified position.
✓ Mounting structure: provide photos or measurements of the attachment points and supporting hardware.
✓ Overall dimensions: provide relevant length, width and mounting measurements where exact replacement compatibility needs to be reviewed.
✓ Movement requirement: if the original armrest rotates, lifts or swings away, include this information with your inquiry.
✓ Required quantity: indicate whether the requirement is for individual maintenance, clinic spare inventory or distributor purchasing.
Dental chair armrests are connected directly to the chair structure, so compatibility involves more than matching the external shape. The mounting points, connection dimensions and surrounding chair geometry should correspond with the replacement component.
If the original armrest includes a movable or release mechanism, its operating arrangement should also be considered during replacement. Please provide photos and relevant details of the original assembly when a specific movement function is required.
The KC-017 is a replacement armrest for compatible dental chair and dental unit applications. Additional material, dimensional, mounting and movement information is available according to replacement and project requirements.
KC-017 Dental Chair Armrest | |
|---|---|
Model | KC-017 |
Product Type | Dental chair armrest |
Application | Dental chair / dental unit spare-part applications |
Brand | KEJU |
Material Specification | Available upon request |
Installation Side | Available according to dental chair configuration |
Dimensions | Available upon request |
Mounting Configuration | Available according to dental chair configuration |
Movement / Adjustment | Available upon request |
Compatibility | Review using dental chair model, original armrest photos, dimensions and mounting information |
As a patient-contact component, the dental chair armrest should be included in the clinic's routine cleaning procedure. Cleaning products should be compatible with the material and surface finish of the supplied KC-017.
The armrest attachment and any applicable moving joints should also be inspected periodically for looseness, visible wear or damage. If the armrest becomes unstable or the mounting hardware is damaged, inspect the component before continued use.
If the Original Part Number Is Unknown
Provide photos of the complete dental chair, close-up images of the original armrest and its mounting points, and relevant dimensions. This information gives our team a more reliable basis for replacement review than visual similarity alone.
The KC-017 is suitable for compatible dental chair maintenance, refurbishment and replacement-part requirements. It can support clinics replacing worn chair components, dental equipment service teams and distributors maintaining spare-parts inventory.
For projects involving several dental chair components, you can submit a complete spare-parts list together with chair models, component photos and required quantities. Our team can review the individual replacement requirements before preparing the quotation.
Founded in 2009 in Foshan, Guangdong, FOSHAN KEJU MEDICAL APPARATUS CO., LTD. designs, develops, manufactures and supplies dental equipment, including dental units and supporting spare and replacement components.
For dental chair replacement requirements, you can provide the original chair model, component photos, mounting information and required quantity so our team can review the applicable spare-part configuration before order confirmation.
Learn more about our company and manufacturing background on the KEJU About page, or browse additional dental chair spare parts.
The KC-017 is a replacement armrest designed for compatible dental chair and dental unit applications.
No universal compatibility should be assumed. The dental chair model, armrest mounting structure, dimensions and installation configuration should be checked before ordering. Please provide the original chair and armrest information so our team can review compatibility.
The required installation side depends on the dental chair configuration. Please provide the chair model, original armrest photos and installation position so our team can review the appropriate KC-017 configuration.
Movement and adjustment specifications are available upon request. If a rotating, lifting or swing-away function is required, please provide details or photos of the original armrest so our team can review the appropriate replacement configuration.
Please provide the dental chair brand and model, original armrest photos, mounting-point images, relevant dimensions, installation side and required quantity.
Yes. You can include multiple dental chair spare parts in the same inquiry with model references, component photos and required quantities. Our team can review the individual requirements together and prepare the corresponding quotation.
Confirm Your KC-017 Armrest Requirement
Provide the dental chair model, original armrest photos, installation side, mounting information, relevant dimensions and required quantity. Our team can then review the KC-017 replacement requirement and prepare the appropriate product information and quotation.
